Inverters

Grid  List 

Set Descending Direction
Page:
  1. 1
  2. 2
per page
  1. Magnum MM612 600W Inverter

    Learn More

    The MM Series Inverter is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system.

    Safe and reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.

    Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Features:

    Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.

    Versatile mounting: Mount the MM Series on a shelf, wall, or even upside down.

    Fan cooled: The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

    Low battery protection: If your battery voltage goes below the cut-out setting the MM Series will automatically shut down, saving your batteries.

    High battery protection: If your battery voltage reaches over the cut-out setting the MM Series will shut down.

    Current overload protection: The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.

    Convenient switches: The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.

    Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.

    Buy with ease: The MM Series is backed by a two-year (24-month) parts and labor warranty.

    Learn More

  2. Magnum RD2824 2800W Inverter/Charger

    Learn More

    The RD Series Inverter / Charger is a new generation modified sine wave inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL 1741 (USA only), ensuring that the inverter is safe and reliable.

    Easy-to-install: Install the RD Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Choices: The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the RD Series on a shelf or wall.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The RD Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The RD Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models.

    Buy with ease: The RD Series is backed by a two-year (24-month) limited warranty.

    Learn More

  3. Magnum MMS1012 1000W Inverter/Charger

    Learn More

    MAGNUM MMS1012

    The Magnum MMS1012 is a diverse inverter/charger that was created to care for small mobile power needs. The inverter function, will change direct current (DC) into alternating current (AC). These currents can be produced from solar panels or stored energy found in batteries. Once converted into AC power, it can be used to power a number of applications. This charger/inverter is frequently used in homes, RVs and boats to power TVs, stereos and other electronics.

    Pure sine wave AC power can be used to run small electronics and mobile applications. Once the charge reaches 100% charge, it will switch over to standby mode. Power is supplied to the outlets by the energy stored in your mobile applications batteries. This charger is safe to use, as it has low and high battery protection. It also has current overload and circuit breaker protection. There are convenient switches, so you can easily turn the charge on and off.

    The amount of power supplied by the Magnum charger/inverter will depend on your battery's state of discharge. The MMS1012 is a pure sine wave inverter/charger, and is a cost efficient solution for your power needs. Magnum made their chargers lighter than others on the market, which makes them easy to take on the go. All Magnum inverters have Power Factor Corrected charger built into them. This makes them 85%  more efficient and reliable. This charger is versatile, easy to use and made for functionality.

    Magnum MMS1012 Features:

    • Power Factor Corrected (PFC) Charger
    • Safe And Reliable
    • Easy-To-Install
    • Economical Design
    • Pure Sine Wave
    • 12 or 24 Volt Configuration
    • Versatile Mounting
    • Lightweight die cast aluminum base
    • Low/high battery protection
    • Standard transfer relay
    • Cooling Fan
    • Current overload and Circuit breaker protection
    • On/Off Inverter-Mounted Switch with LED Indicator
    • Battery temp sensor

    Applications:

    The Magnum MMS1012 can be used for a number of small power needs. It is a cost efficient solution to use with RVs and marine systems. This charger/inverter can be used to power entertainment systems and small appliances. Magnum provides a reliable power source in an easy to handle design. It is easy to take on the go, and can be mounted in a number of ways.

    Learn More

  4. Magnum MS2012 2000W Inverter/Charger

    Learn More

    MAGNUM MS2012

    When you live in an area that has frequent power outages, it is important that you are prepared. Preparation would include having a dependable power source. The Magnum  MS2012 is a charger/inverter that was designed to specifically care for demanding mobile, backup power sources and off grid applications. Living in a remote location no longer has to be an issue, as Magnum is providing the solution to recharging back up power.

    The MS Series was designed with power in mind, ease of use and affordability. There are many features, which make Magnum the number one choice for charger & inverter needs. The MS2012 contains a built in Power Factor Corrected (PFC) Charger, which uses 25 to 30 percent less AC currents than traditional chargers when hooked to a generator.

    Magnum ensures their products follow all safety standards that were set by the industry. This charger is a pure sine wave, which supplies you with clean and renewable energy. Plus, this inverter has low total harmonic distortion (THD) of less than 5%.

    The MS2012 gives you options when it comes to voltage configuration and mounting. Being able to mount this unit on a shelf, bulkhead or upside down will allow you to use it in tight areas. The base is made of lightweight aluminum, and the cover reduces noise and is corrosion resistant. With multiple ports, you can care for all of your applications. It has an RS485 communication port for network expansion and a remote port.

    There are extra large AC access covers that have terminal screw blocks and 360 degree DC connection terminals. This makes the inverter more accessible. The switches are located in a convenient area, and there is an LED indicator.

    Magnum MS2012 Features:

    • Power Factor Corrected (PFC) Charger
    • Safe And Reliable
    • Easy-To-Install
    • Pure Sine Wave
    • 12 or 24 Volt Configuration
    • Versatile Mounting
    • Lightweight Aluminum Base
    • Cover Reduces Noise And  Is Corrosion Resistant
    • Multiple Ports
    • Accessible Design
    • Expanded Transfer Relay
    • Extra Large AC Access Cover
    • Terminal Screw Block And 360° DC Connection Terminal
    • On/Off Inverter-Mounted Switch with LED Indicator
    • 3 Year Limited Warranty

    Applications:

    The Magnum MS2012 was designed to care for demanding mobile, backup power sources and off grid applications. Magnum is a reputable company that you can trust with your charger and inverter needs. 

    Learn More

  5. Magnum MS4024 4000W Inverter/Charger

    Learn More

    MAGNUM MS4024

    The Magnum MS4024 Inverter/Charge has a pure sine wave design, and is ideal for demanding mobile, backup and off grid applications. Magnum created the MS4024 with enough power to care for your energy needs. It is user friendly and very cost effective.

    All Magnum Inverters contain a Power Factor Corrected (PFC) Charger, which uses 25 to 30 percent less AC currents than standard chargers when hooked to a generator. With easy to reach terminal blocks, installation is a breeze.  This inverter supplies you with clean energy that can power small electronics, such as TVs and stereos. Magnum supplies you with reliable energy that has a low total harmonic distortion (THD) of less than 5 percent.

    This inverter/charge can be mounted in a variety of ways, including on a shelf, bulkhead or upside down. The base is made of lightweight aluminum, and the cover reduces noise and is corrosion resistant. The possibilities are endless with this charger,as there are multiple port options.

    All safety standards are met during the construction of Magnum chargers/inverters, which give you the assurance that you are buying a dependable product. The on and off switch has an easy to read LED indicator, so there will be no guessing if the charger is on or off.  Comes with 60 amp Expanded Transfer Relay, which gives you even more possibles.

    Magnum MS4024 Features:

    • Power Factor Corrected (PFC) Charger
    • Safe And Reliable
    • Easy-To-Install
    • Pure Sine Wave
    • 12 or 24 Volt Configuration
    • Versatile Mounting
    • Lightweight Aluminum Base
    • Cover Reduces Noise And  Is Corrosion Resistant
    • Multiple Ports
    • Accessible Design
    • On/Off Inverter-Mounted Switch with LED Indicator
    • Expanded Transfer Relay
    • Terminal Screw Block And 360° DC Connection Terminal
    • 3 Year Limited Warranty

    Applications:

    When working with demanding mobile applications, you will want to have the Magnum MS4024 inverter/charger on your side. They can be used with renewable energy systems, off-grid, back-up power, marine applications, and RVs. This is the perfect solution when on the go. Magnum is a reputable company that you can trust with your charger and inverter needs.

    Learn More

  6. Magnum MS4448PAE 4400W Inverter/Charger

    Learn More

    MAGNUM MS4448PAE

    When working with high demand renewable energy applications you need a dependable pure sine wave inverter. The Magnum MS4448PAE is robust in its offerings, and provides its users with a unique design. This inverter has two 120VAC output lines that are 180 degrees out-of-phase with each other, which allows you to combine the L1 and L2 lines for a total of 240VAC output. This eliminates the need to purchase two separate inverters to get 240VAC.

    This unit has the ability to be connected to other MS-PAE Series inverters in a parallel configuration. You can join up to 4 inverters for a total of 17.6 kW of power at 120/240. The base is lightweight and made of aluminum. The cover contains noise reduction properties, and is corrosion resistant. 

    There are multiple ports, which includes an RS485 communication port for network expansion, and a remote port. The design is easily accessible with an extra large AC access cover that has a terminal screw block, and 360 degree DC connection terminals. This inverter has a built in Power Factor Corrected Charger, and can be mounted on a shelf or the wall.

    Magnum MS4448PAE Features:

    • Power Factor Corrected (PFC) Charger
    • Easy-To-Install
    • Pure Sine Wave
    • 24 or 48 Volt Configuration
    • Lightweight Aluminum Base
    • Cover Reduces Noise And  Is Corrosion Resistant
    • Multiple Ports
    • Parallel stacking
    • Versatile mounting
    • Accessible Design
    • On/Off Inverter-Mounted Switch with LED Indicator
    • Terminal Screw Block And 360° DC Connection Terminal
    • 3 Year Limited Warranty

    Applications:

    The Magnum MS4448PAE was created to care for high demanding renewable energy applications. It is robust in its offerings, as this inverter allows parallel stacking. With the Power Factor Corrected Charger, this inverter uses less power when hooked to a generator than a standard charger does. 

    Learn More

  7. Magnum RD2212 2200W Inverter/Charger

    Learn More

    The RD Series Inverter / Charger is a new generation modified sine wave inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL 1741 (USA only), ensuring that the inverter is safe and reliable.

    Easy-to-install: Install the RD Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Choices: The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the RD Series on a shelf or wall.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The RD Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The RD Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models.

    Buy with ease: The RD Series is backed by a two-year (24-month) limited warranty.

    Learn More

  8. Magnum MM1324E 1300W Inverter/Charger

    Learn More

    Magnum Energy now offers the MM-E Series Inverter/Charger for 230 VAC / 50 Hz installations. The MM-E Series comes with all of the features you’ve come to expect from a Magnum product, including:

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers.  It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 – 50° C.

    Convenient switches: All models come with an on/off inverter-mounted switch with an easy-to-read LED indicator.

    Features:

    Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Fan cooled: The MM-E Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

    Versatile mounting: Mount the MM-E Series on a shelf, wall, or even upside down.

    Battery and inverter protection: The MM-E Series protects your batteries and itself with low battery, high battery, current overload, and circuit breaker protection.

    Learn More

  9. Magnum MS2000-15B 2000W Inverter/Charger

    Learn More

    The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable:  The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1- 01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

    Easy-to-install:  Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

    Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

  10. Magnum MS2024 2000W Inverter/Charger

    Learn More

    The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable:  The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1- 01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

    Easy-to-install:  Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

    Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

  11. Magnum MSH4024RE 4000W Inverter/Charger

    Learn More

    The MSH-RE Series Inverter / Charger from Magnum Energy – a pure sine wave inverter that combines the tried and tested engineering of Magnum’s MS line with hybrid technology to make it an optimal choice for your renewable and backup power needs.

    Hybrid technology: Most inverters only use one source of energy to power loads, either from incoming AC power – shore or AC generator – or from the batteries. The MSH-M Series combines the energy from both sources to power loads. This allows the inverter to recharge the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply by itself.

    Load support: Load support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Easy-to-install: Install the MSH-M Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power

    Dual AC inputs: The MSH-RE Series comes with two 60 amp AC inputs – a grid input at 60A and a generator input at 60A.

    Interchangeable: The MSH-RE is interchangeable with the Magnum MS Series and uses the same accessories as the MS Series.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MSH-RE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design:  The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MSH-RE Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Buy with ease: The MSH-RE Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP system.

    Learn More

  12. Magnum ME2512 2500W Inverter/Charger

    Learn More

    The ME Series Inverter/Charger from Magnum Energy is a modified sine wave inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.

    Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.

    Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter / chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Choices: The ME Series comes in three power models and optional built-in branch rated AC output breakers, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the ME Series on a shelf or wall.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The ME  Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design:  The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The ME  Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models, and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out.

    Buy with ease:  The ME Series is backed by a three-year (36-month) limited warranty.

    Learn More

  13. Magnum MM1512AE 1500W Inverter/Charger

    Learn More

    The MM Series Inverter / Charger is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system.

    Safe and reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.

    Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Features:

    Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.

    Versatile mounting: Mount the MM Series on a shelf, wall, or even upside down.

    Fan cooled: The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

    Low battery protection: If your battery voltage goes below the cut-out setting the MM Series will automatically shut down, saving your batteries.

    High battery protection: If your battery voltage reaches over the cut-out setting the MM Series will shut down.

    Current overload protection: The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.

    Convenient switches: The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.

    Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.

    Buy with ease: The MM Series is backed by a two-year (24-month) parts and labor warranty.

    Learn More

  14. Magnum RD3924 3900W Inverter/Charger

    Learn More

    The RD Series Inverter / Charger is a new generation modified sine wave inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL 1741 (USA only), ensuring that the inverter is safe and reliable.

    Easy-to-install: Install the RD Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Choices: The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the RD Series on a shelf or wall.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The RD Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The RD Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models.

    Buy with ease: The RD Series is backed by a two-year (24-month) limited warranty.

    Learn More

  15. Magnum MMS1012-G 1000W Inverter/Charger

    Learn More

    The MMS Series Inverter / Charger is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable: The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.

    Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Features:

    Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power.

    Low/high battery protection: If your battery voltage reaches below 10 VDC or above 17 VDC, the MMS Series will automatically shut down.

    Versatile mounting: Mount the MMS Series on a shelf, bulkhead, or even upside down.

    Fan cooled: The MMS Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

    Current overload protection: The MMS Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.

    Convenient switches: The MMS Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.

    Circuit breaker protection: This model comes with built in input and output circuit breakers for ease of installation.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.

    Buy with ease: The MMS Series is backed by a two-year (24-month) parts and labor warranty

    Learn More

  16. Magnum MS2012-15B 2000W Inverter/Charger

    Learn More

    The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable:  The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1- 01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

    Easy-to-install:  Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

    Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

  17. Magnum MSH3012M 3000W Inverter/Charger

    Learn More

    MAGNUM MSH3012M

    The Magnum MSH3012M is a robust inverter that uses hybrid-pure sine wave technology. This charger is designed to care for the most rugged mobile applications, including trucks, RVs and boats. It is a dependable inverter that is constructed for longevity.

    Hybrid inverters will take a combination of AC input, as well as power from the batteries or generator to provide the energy load that the inverter needs. This allows the inverter to recharge batteries when there is a surplus of power supply, or it will provide more power to the load if the inverter requires more than the AC input can supply.

    This inverter has a natural ground switch, which can be used to power land vehicles or marine crafts. Overall, this inverter can handle larger loads from small generators. The pure sine wave is a clean source of energy that will power delicate electronics. This reliable energy source has low total harmonic distortion of less than 5 percent.

    It is easy to install, and interchangeable with the Magnum MS Series and accessories. The base is constructed with lightweight aluminum, while the cover is corrosion resistant and reduces noise. You have your choice of 12 or 24 volt configurations, which allows you to choose the power source that is needed.

    Features:

    • Power Factor Corrected (PFC) Charger
    • Easy-To-Install
    • Hybrid-Pure Sine Wave
    • 12 or 24 Volt Configuration
    • Lightweight Aluminum Base
    • Cover Reduces Noise And  Is Corrosion Resistant
    • Multiple Ports
    • Accessible Design
    • On/Off Inverter-Mounted Switch with LED Indicator
    • Terminal Screw Block And 360° DC Connection Terminal
    • Interchangeable with the Magnum MS Series
    • 3 Year Limited Warranty

    Applications:

    The Magnum MSH3012M gives you more possibilities, as it uses hybrid-pure sine wave technology. It is best suited for rugged mobile applications, including trucks, RVs and boats. This inverter has a natural ground switch, which can be used to power land vehicles or marine crafts.

    Learn More

  18. Magnum ME2012 2000W Inverter/Charger

    Learn More

    MAGNUM ME2012

    When looking for a cost efficient charger/inverter, the MAGNUM ME2012 is the one you should consider. It contains a number of features, and is designed to care for rugged mobile applications. The Magnum ME Series was designed to provide power, to be user friendly, and affordable. This charger/inverter contains a number of safety measures, which makes it dependable.

    It contains pure sine wave, and has a built in Power Factor Corrected Charger. This charger uses 25 to 30 percent less AC currents when plugged into a generator than a standard charger does. There are convenient terminal blocks and switches to power the unit on and off.

    The Magnum ME Series offers  three power models, and optional built-in branch rated AC output breakers. This allows you to choose a charger that is right for your needs. With versatile mounting, the unit can be installed on a shelf or wall. It is lightweight and has a noise reduction cover that is resistant to corrosion.

    There are multiple ports, which includes an RS485 communication port for network expansion, and a remote port. With expanded transfer relay, you have the choice to wire the unit in three different ways. This includes single in / single out, single in / dual out, or dual in / dual out. With 60 Amps of transfer service, all of your power needs are cared for.

    Features:

    • Power Factor Corrected (PFC) Charger
    • Safe And Reliable
    • Easy-To-Install
    • Pure Sine Wave
    • 12 or 24 Volt Configuration
    • Versatile Mounting
    • Lightweight Aluminum Base
    • Cover Reduces Noise And  Is Corrosion Resistant
    • Multiple Ports
    • Accessible Design
    • Expanded Transfer Relay
    • Terminal Screw Block And 360° DC Connection Terminal
    • On/Off Inverter-Mounted Switch with LED Indicator
    • 3 Year Limited Warranty

    Applications:

    The MAGNUM ME2012can be used in RV and Marine applications. It is made for rugged mobile applications, which will care for all your on the go needs. Magnum is a reliable company, and they supply consumers with robust product offerings. When you have a need for a charger/inverter, you should entrust a company that cares. Magnum is the one you can rely on.

    Learn More

  19. Magnum MM1212 1200W Inverter/Charger

    Learn More

    The MM Series Inverter / Charger is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system.

    Safe and reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.

    Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Features:

    Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.

    Versatile mounting: Mount the MM Series on a shelf, wall, or even upside down.

    Fan cooled: The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

    Low battery protection: If your battery voltage goes below the cut-out setting the MM Series will automatically shut down, saving your batteries.

    High battery protection: If your battery voltage reaches over the cut-out setting the MM Series will shut down.

    Current overload protection: The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.

    Convenient switches: The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.

    Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.

    Buy with ease: The MM Series is backed by a two-year (24-month) parts and labor warranty.

    Learn More

  20. Magnum RD1824 1800W Inverter/Charger

    Learn More

    The RD Series Inverter / Charger is a new generation modified sine wave inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL 1741 (USA only), ensuring that the inverter is safe and reliable.

    Easy-to-install: Install the RD Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Choices: The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the RD Series on a shelf or wall.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The RD Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The RD Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models.

    Buy with ease: The RD Series is backed by a two-year (24-month) limited warranty.

    Learn More

  21. Magnum MMS912E 900W Inverter/Charger

    Learn More

    The MMS-E Series Inverter/Charger is a pure sine wave inverter providing a cost effective solution for those with smaller power needs. Versatile, easy-to-use, and lightweight, the MMS-E Series provides a reliable base for your energy system.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable: The MMS-E Series is listed to the stringent CE requirements, ensuring the inverter/charger is safe and reliable.

    Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Features:

    Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power.

    Low/high battery protection: If your battery voltage reaches below 10 VDC or above 17 VDC, the MMS-E Series will automatically shut down.

    Versatile mounting: Mount the MMS-E Series on a shelf, wall, or even upside down.

    Fan cooled: The MMS-E Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down. The MMS-E Series pure sine wave inverter/charger

    Current overload protection: The MMS-E Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.

    Convenient switches: The MMS-E Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.

    Circuit breaker protection: This model comes with built in input and output circuit breakers for ease of installation.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.

    Buy with ease: The MMS-E Series is backed by a two-year (24-month) parts and labor warranty.

    Learn More

  22. Magnum MS2000-20B 2000W Inverter/Charger

    Learn More

    The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable:  The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1- 01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

    Easy-to-install:  Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

    Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

  23. Magnum MS2812 2800W Inverter/Charger

    Learn More

    Magnum MS2812

    The Magnum MS2812 Inverter/Charger was created for high demanding mobile, back-up and off grid applications. This charger/inverter has a number of features, is user friendly and very cost efficient. Magnum designed this inverter with pure sine wave technology. This technology provides users with a clean and reliable inverter source of power. Plus, it has a low total harmonic distortion (THD) of less than 5%.

    This inverter/charger offers 12 volts of power, but Magnum does supply other models that offer 24 volts. All Mangum inverters contain a Power Factor Corrected Charger, which uses less energy when plugged into a generator than standard chargers. There are easy to reach terminal blocks, which allows you to quickly connect your battery.

    This diverse inverter/charger provides a number of mounting options, including on a shelf, bulkhead, or even upside down. The base is made of lightweight aluminum, and the cover is designed to reduce noise. It is corrosion resistant, and meets all safety regulations set by the industry.

    Magnum MS2812 Features:

    • Power Factor Corrected (PFC) Charger
    • Safe And Reliable
    • Easy-To-Install
    • Pure Sine Wave
    • 12 or 24 Volt Configuration
    • Versatile Mounting
    • Lightweight Aluminum Base
    • Cover Reduces Noise And  Is Corrosion Resistant
    • Multiple Ports
    • Accessible Design
    • Expanded Transfer Relay
    • Extra Large AC Access Cover
    • Terminal Screw Block And 360° DC Connection Terminal
    • On/Off Inverter-Mounted Switch with LED Indicator
    • 3 Year Limited Warranty

    Application:

    The Magnum MS2812 was made to care for a number of applications, which includes renewable energy systems, off-grid, back-up power, marine applications, and RVs. This is the perfect solution when on the go. Magnum is a reputable company that you can trust with your charger and inverter needs.

    Learn More

  24. Magnum MS4024PAE 4000W Inverter/Charger

    Learn More

    The MS-PAE 120/240V Series Inverter / Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PAE Series is powerful, easy-touse, and best of all, cost effective.

    No series stacking required: The unique design of the MS-PAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to get 240 volts.

    Parallel stacking: You can parallel up to four inverter / chargers for up to 17.6kw of power at 120/240V. The MP panels and router are required for parallel stacking the MS-PAE Series.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable: The MS-PAE Series is ETL Listed to the stringent requirements of UL 1741, 1st edition, and CSA C22.2 #107.1-01 for renewable energy installations.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS-PAE Series comes in 24 and 48 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS-PAE Series on a shelf or wall.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS-PAE  Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design:  The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS-PAE  Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Buy with ease: The MS-PAE Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

  25. Magnum ME3112 3100W Inverter/Charger

    Learn More

    The ME Series Inverter/Charger from Magnum Energy is a modified sine wave inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.

    Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.

    Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter / chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Choices: The ME Series comes in three power models and optional built-in branch rated AC output breakers, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the ME Series on a shelf or wall.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The ME  Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design:  The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The ME  Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models, and can be wired in three ways, including single in / single out, single in / dual out, or dual in / dual out.

    Buy with ease:  The ME Series is backed by a three-year (36-month) limited warranty.

    Learn More

  26. Magnum MM1524AE 1500W Inverter/Charger

    Learn More

    The MM Series Inverter / Charger is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system.

    Safe and reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.

    Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Features:

    Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.

    Versatile mounting: Mount the MM Series on a shelf, wall, or even upside down.

    Fan cooled: The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

    Low battery protection: If your battery voltage goes below the cut-out setting the MM Series will automatically shut down, saving your batteries.

    High battery protection: If your battery voltage reaches over the cut-out setting the MM Series will shut down.

    Current overload protection: The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.

    Convenient switches: The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.

    Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.

    Buy with ease: The MM Series is backed by a two-year (24-month) parts and labor warranty.

    Learn More

  27. Magnum MM1012E 1000W Inverter/Charger

    Learn More

    Magnum Energy now offers the MM-E Series Inverter/Charger for 230 VAC / 50 Hz installations. The MM-E Series comes with all of the features you’ve come to expect from a Magnum product, including:

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers.  It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 – 50° C.

    Convenient switches: All models come with an on/off inverter-mounted switch with an easy-to-read LED indicator.

    Features:

    Features Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

    Fan cooled: The MM-E Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

    Versatile mounting: Mount the MM-E Series on a shelf, wall, or even upside down.

    Battery and inverter protection: The MM-E Series protects your batteries and itself with low battery, high battery, current overload, and circuit breaker protection.

    Learn More

  28. Magnum MS2000 2000W Inverter/Charger

    Learn More

    The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable:  The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1- 01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

    Easy-to-install:  Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

    Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

  29. Magnum MS2012-20B 2000W Inverter/Charger

    Learn More

    The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile, back-up, and off-grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

    Safe and reliable:  The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1- 01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

    Easy-to-install:  Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

    Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

  30. Magnum MSH4024M 4000W Inverter/Charger

    Learn More

    The MSH-M Series Inverter / Charger from Magnum Energy – a pure sine wave inverter designed with true hybrid technology allowing it to run larger loads from smaller generators.

    Hybrid technology: Most inverters only use one source of energy to power loads, either from incoming AC power – shore or AC generator – or from the batteries. The MSH-M Series combines the energy from both sources to power loads. This allows the inverter to recharge the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply by itself.

    Load support: Load support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators.

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Easy-to-install: Install the MSH-M Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power

    Choices: The MSH-M Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Interchangeable: The MSH-M is interchangeable with the Magnum MS Series and uses the same accessories as the MS Series.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MSH-M Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design:  The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MSH-M Series comes with an on/ off inverter-mounted switch with an easy-to-read LED indicator.

    Buy with ease: The MSH-M Series is backed by a three-year (36-month) limited warranty, and a five-year limited warranty when installed on an MMP or MP system.

    Learn More

Grid  List 

Set Descending Direction
Page:
  1. 1
  2. 2
per page