Inverters

Grid  List 

Set Descending Direction
per page
  1. Schneider Electric CONEXT BATTERY MONITOR 24/48V RNW865108001

    Learn More
    Conext™ Battery Monitor indicates hours of battery based runtime and determines battery bank state of charge. Conext Battery Monitor shares key battery bank parameters with Conext XW+ inverter/chargers improving overall system performace of 24V and 48V battery banks. Detecting battery string imbalance is determined using innovative mid-point sensing technology providing time to address the issue before performance is significantly impacted. Learn More

  2. Schneider CONEXT XW+ CONNECTION KIT RNW865102002

    Learn More

    Schneider CONEXT XW+ CONNECTION KIT RNW865102002 FOR INV2 INV3 PDP / 250A 160VDC / AC­DC CABLES

    The XW+ Connection Kit is a wiring kit and conduit box used to connect additional inverters into an XW+ Power Distribution Panel. All wires are measured, pre-cut and labeled to facilitate easy installation. Interfaces with: XW5548 and XW6848 Inverter/Charger(s), XW+ Power Distribution Panel. Learn More

  3. Schenider Electric CONEXT AUTO GENERATOR START FOR XW+ AND SW RNW865106001

    Learn More
    The XW+ and SW Auto Generator Start (XW+ and SW AGS) will automatically activate a generator to provide an Schneider Series Hybrid Inverter/Charger with power to recharge a depleted battery bank or provide additional power for heavy loads. The XW+ and SW AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads. It does this by continuously monitoring the battery voltage, state-of-charge, or the inverter charge mode, starting and stopping the generator when the battery needs additional charging. The XW+ and SW AGS will also start the generator to assist the system’s inverter/charger(s) when output power demands are high. The XW+ and SW AGS can be customized to suit each user’s preferences. The user can define whether the generator should be activated by low-battery voltage, state-of-charge, thermostat operation, or load on the inverter(s). A quiet-time setting prevents the generator from starting at inconvenient times. LED lights display the status of the XW+ and SW AGS, while all user-defined settings are programmed through the Scheider Electric System Control Panel (SCP).

    Features:

    LED display showing at-a-glance status 20-contact generator connector and three built-in relays support 13 preset generator configurations Built-in emergency shutdown Xanbus™-enabled Learn More

  4. Schneider Electric Remote On/Off Switch for Conext SW Inverters RNW8651052

    Learn More
    The RNW8651052 (865-1052) is designed to work with the Schneider Electric Conext SW line of inverters. The switch allows you to remotely turn your inverter on or off from an adjacent room or location. It can also be useful if your inverter is installed inside a utility closet, by allowing you to turn the unit on or off without having to gain access to the closet or utility room. Learn More

  5. Schneider Electric CONFIG TOOL RNW8651155

    Learn More
    The Conext™ Configuration tool is used by system installers to simplify the task of system configuration and reduce installation time. It’s a PC-based software tool that works on systems that include the Conext™ XW, Conext™ XW+, Conext™ SW, and peripherals. The Conext Configuration tool is not meant to replace the Conext™ System Control Panel (SCP), Conext™ ComBox or any other monitoring devices. Those monitoring devices may still be required to monitor the Conext System and components. Software and drivers for the Conext Configuration Tool are under the downloads section (Firmware). Conext Config USB Driver is firmware used for general installation setup. Conext Config Tool Software_AI (Anti-Islanding) is used when 2 or more inverters are installed in parallel on a single phase connection (See Conext XW+ Multi-Unit Power System Design Guide under the downloads section (Technical Publications). It is also used if there is a specific requirement by a utility. Note: Adjustment of AC anti-islanding parameters should only be done after consultation with the power utility or authority having jurisdiction. Note: The configuration tool should not be used with Conext ComBox in-network especially when performing Firmware Upgrades. Use either the Conext ComBox or the configuration tool to complete firmware upgrades – but not both. Learn More

  6. Schneider Conext ComBox Communications Device

    Learn More

    Conext ComBox

    The Conext™ ComBox is a powerful communications and monitoring device for installers and operators of Conext solar systems. It features an integrated web server, enabling graphical displays of system daily, monthly and lifetime energy data to be viewed using a simple web browser or Android™ tablet device. Installers can change or configure the settings of Conext devices through the user-interface on the ComBox and respond to system email alerts promptly. A user-configurable data logger and integrated FTP server provides the system owner with powerful analytics tool for data download and analysis. Modbus™ interface on the ComBox links Conext devices with third party systems through RS-485 or Ethernet ports. For large multi-cluster systems, the ComBox can be setup in a master-slave configuration. Conext ComBox easily connects with Conext Insight to enable you to remotely monitor a portfolio of sites from any internet connected device like a laptop or a tablet.

    Conext ComBox Features -

    High return on investment • Monitor solar system harvest and yield anytime, anywhere • Measure and compare energy performance over varying timelines • Receive email alerts and reduce system downtime Easy to service • View or download an events log for faster troubleshooting • Upgrade ComBox and Conext device firmware through a web browser or Android tablet • Settings are maintained during power or network interruptions Flexible • Monitoring as well as control device to support zero export applications for residential grid-tie • Multiple visualization for trends analysis as well as custom data logging for diagnostics • Retrieve data logs or system information through USB, Micro-SD card, RS485, Ethernet Easy to install • Configure devices using web browser, Android tablet or Modbus • Surface or DIN-Rail mounting options • Multiple power supply options, AC adapter, Xanbus, RS485

    Applications:

    • Commercial backup power
    • Commercial off-grid solar
    • Residential backup power
    • Residential grid-tie solar with backup power
    • Telecom towers
    • Community electrification
    • Learn More

  7. Schneider Electric Conext XW+ Conduit Box RNW865102501

    Learn More
    The XW+ Conduit Box is a bare conduit box (no wires) that can be used to create systems with two or more XW+ inverters or to retrofit XW+ Inverters into existing systems which may already have AC/DC disconnects. Learn More

  8. Schneider Electric Conext SW AC Stacking Kit 120/240 Volts RNW8651019

    Learn More
    This stacking kit requires the Conext SW AC switchgear (part number 865-1017). The switchgear enclosure does NOT come with the stacking kit. The Schneider Electric Conext SW AC stacking kit allows you to combine the output of two Conext SW inverters. This kit is designed for the 120/240 volts AC inverter models.

    KIT CONTENTS:

    Installation guide Two double-pole 30A AC breakers One double-pole 60A AC breaker Two jumper bars One interlock plate with two screws One breaker label sticker Six 10 AWG black wires Two 10 AWG red wires One 10 AWG white neutral wire One 10 AWG green ground wire Learn More

  9. Schneider Conext XW+ 6.8kW 120/240 Volt Inverter 48V Charger RNW865684801

    Learn More
    Schneider Electric Conext XW+6848 6.8kW 120/240V Inverter/Charger Previous Part #: 865-6848-01 ConextTM XW+ is an adaptable single-phase and three-phase hybrid inverter with grid-tie functionality and dual AC power inputs. Available solar charge controllers, monitoring, and automated generator control modules enable further adaptability. From a single Conext XW+ unit to clusters up to 102 kW, the Conext XW+ is a scalable system that allows for the integration of solar capacity as required. Adaptable and scalable, the Schneider ElectricTM Conext XW+ system is the one solution for grid-interactive and off-grid, residential and commercial, solar and backup power applications.

    Why choose Conext XW+ NA?

    • Excellent load starting with high 30-minute and 5-second power • Performs in hot environments up to 70°C • Intelligent functionality enables solar prioritization, load shifting, peak shaving, and assists small generators with heavy loads • Backup power with grid-tie functionality converts external DC power to AC power for export to the utility grid

    Designed for reliability

    • Extensive quality and reliability testing • Highly Accelerated Life Testing (HALT) • Globally proven and recognized field performance

    Flexible

    • Single or three phase systems from 7.0 kW to 102 kW • Supports DC coupled and AC coupled off-grid and grid-tie architectures • Supports charging of Lithium Ion battery packs

    Easy to service

    • Field serviceable with replacement boards and spare parts • Monitor, troubleshoot or upgrade firmware with Conext ComBox

    Easy to install

    • System configures quickly into compact wall-mounted system • Integrates both grid and generator power with dual AC inputs • Balance of system components integrates battery bank, solar charge controllers and generators • Commission the entire system with PC software tool and Conext ComBox Learn More

  10. Schneider CONEXT SW 4024 4000W INV.CHAR 120/240VAC RNW8654024

    Learn More
    The Conext SW inverters replace the old TR series of modified sine wave inverters. Just like the TR series, the SW series is perfect for homes and cabins. It's not recommended for marine environments because the unit is not completely sealed. The Schneider Electric Conext SW line of inverters is perfect for off-grid and backup power systems. Its pure sine wave output ensures that it's compatible with all of your AC powered equipment and devices. The units also have a built-in charger that can recharge your battery bank from a generator or other AC source. The AC output is split phase 120/240 volts and can be set for 50Hz or 60Hz operation. The user may also stack the SW units together to double the power output capability. The Schneider Conext SW inverters are some of the lowest cost, feature rich and user friendly inverters in its class. Other inverters with similar functionality and features can cost hundreds more.

    Features and Specifications:

    Model: SW 4024-120 Part Number: RNW8654024 Easy to install - click the DETAILS tab above for a link to the install guide Includes a battery temperature sensor (BTS) Capable of remote monitoring and configuration Selectable between 50/60Hz output Output: Split-phase 120/240 volts AC Built-in battery charger Output Power: 3,400 Watts continuous, 4,000 Watts for 30 minutes Surge Rating: 7,000 Watts for 5 seconds Peak Current: 41 amps 100% pure sine wave Idle consumption search mode: <11 Watts Dimensions: 16.5" x 13.4" x 7.6" Weight: 62 pounds Learn More

  11. Schneider CONEXT XW+ 5.5 KW 120/240V INVERTER 48V CHARGER RNW865554801

    Learn More
    The Conext XW series has one of the best sine waves of all inverters on the market today. Schneider Electric brings the next generation of inverter/charger to market, with the XW Hybrid Inverter/Charger, the heart of the XW System. The XW Hybrid Inverter/Charger is a true sine wave, 120/240 volt AC, split-phase, inverter/charger that incorporates a DC to AC inverter, a battery charger, and an AC auto-transfer switch. It is the foundation for battery-based residential and commercial applications. Capable of being grid-interactive or grid independent, the XW+ can operate with generators and renewable energy sources to provide full-time or backup power. Designed with consultation and input from industry experts, dealers, and installers, the XW sets a new standard for battery-based inverter/chargers. Integrating the best features available in the market, innovative new features by Schneider Electric and balance-of-systems components, the XW+ hybrid inverter/chargers design makes installation quicker and easier. The XW+ offers high efficiency and unprecedented surge capacity to maximize the owners return on investment. No other inverter/charger looks or performs like the XW+.

    Specifications:

    Continuous Output Power at 25ºC (77ºF): 5,500 Watts Overload Power (30 min / 60 sec) 25ºC (77ºF) : 7,000 / 9,500 Watts Continuous Output Power at 40ºC (104ºF): 4,500 Watts Output AC Frequency: 50/60 Hz (selectable) Max. Output Charging Current: 110 Amps (battery temp. sensor is included) Peak Efficiency: 95.7% Weight: 118 lbs. Dimensions (H x W x D): 23" x 16" x 9" Regulatory Approval: UL1741, CSA 107.1, FCC & Industry Canada Class B, IEEE 1547 and CSA 107.1 Learn More

  12. Schneider CONEXT SW 2524 2500W INV.CHAR 120/240VAC RNW8652524

    Learn More
    The Conext SW inverters replace the old TR series of modified sine wave inverters. Just like the TR series, the SW series is perfect for homes and cabins. It's not recommended for marine environments because the unit is not completely sealed. The Schneider Electric Conext SW line of inverters is perfect for off-grid and backup power systems. Its pure sine wave output ensures that it's compatible with all of your AC powered equipment and devices. The units also have a built-in charger that can recharge your battery bank from a generator or other AC source. The AC output is split phase 120/240 volts and can be set for 50Hz or 60Hz operation. The user may also stack the SW units together to double the power output capability. The Schneider Conext SW inverters are some of the lowest cost, feature rich and user friendly inverters in its class. Other inverters with similar functionality and features can cost hundreds more.

    Features and Specifications:

    Model: SW 2524-120 Part Number: RNW8652524 Easy to install - click the DETAILS tab above for a link to the install guide Includes a battery temperature sensor (BTS) Capable of remote monitoring and configuration Selectable between 50/60Hz output Output: Split-phase 120/240 volts AC Built-in battery charger Output Power: 3,000 Watts continuous, 3,300 Watts for 30 minutes Surge Rating: 5,000 Watts for 5 seconds Peak Current: 24.3 amps 100% pure sine wave Idle consumption search mode: Dimensions: 16.5" x 13.4" x 7.6" Weight: 50 pounds Learn More

  13. Schneider CONEXT SW 4048 4000W INV.CHAR 120/240VAC RNW8654048

    Learn More
    The Conext SW inverters replace the old TR series of modified sine wave inverters. Just like the TR series, the SW series is perfect for homes and cabins. It's not recommended for marine environments because the unit is not completely sealed. The Schneider Electric Conext SW line of inverters is perfect for off-grid and backup power systems. Its pure sine wave output ensures that it's compatible with all of your AC powered equipment and devices. The units also have a built-in charger that can recharge your battery bank from a generator or other AC source. The AC output is split phase 120/240 volts and can be set for 50Hz or 60Hz operation. The user may also stack the SW units together to double the power output capability. The Schneider Conext SW inverters are some of the lowest cost, feature rich and user friendly inverters in its class. Other inverters with similar functionality and features can cost hundreds more.

    Features and Specifications:

    Model: SW 4048-120 Includes a battery temperature sensor (BTS) Capable of remote monitoring and configuration Selectable between 50/60Hz output Output: Split-phase 120/240 volts AC Built-in battery charger Output Power: 3,800 Watts continuous, 4,400 Watts for 30 minutes Surge rating: 7,000 Watts for 5 seconds Peak Current: 41 amps 100% pure sine wave Dimensions: 16.5" x 13.4" x 7.6" Weight: 62 pounds Learn More

Grid  List 

Set Descending Direction
per page